Base for making resin clocks and paintings - 400mm - with a hole

Product detailed description

Resin Art & Clock Making Board – 400 mm – with Hole is a great choice for anyone who wants to make clocks without unnecessary drilling. The board has a milled recess for the clock mechanism so that the mechanism sits cleanly and straight, and also a prepared hole for the spindle, onto which the hands are attached.

Thanks to its 18 mm thickness, the board appears very robust and is also suitable for more substantial projects – for example, clocks with a larger layer of resin, wood + resin combinations, or moss clocks.

Advantages of the board with a milled recess

• saves time – the center is prepared, you don't need to measure or drill anything,
• clean and precise workmanship – recess for the mechanism + hole for the spindle,
• Stability and strength thanks to the 18 mm thickness,
• suitable for clocks where you want the center to be perfectly symmetrical.

Use

• epoxy resin wall clocks – geode effect, marbling, layered casting,
• clocks combining resin and wood,
• moss clocks and natural circular decorations,
• circular decorative panels and pictures, if you want a prepared technical center.

Parameters

• Diameter: 400 mm
• Thickness: 18 mm
• design: milled recess for clock movement + hole for spindle

Tip for working with resin

• before pouring, clean and degrease the substrate,
• for more absorbent substrates, a thin base layer is recommended to seal the surface and reduce bubbles,
• when pouring, temporarily cover the hole for the mechanism with tape or insert to prevent resin from entering it.

If you want to make resin clocks faster and with a precisely prepared center, the 400 mm base with a milled hole and a thickness of 18 mm is an excellent foundation for a clean and professional result.