Epoxy resin SPEED 10-12-600 UV+

Product detailed description

Pouring Epoxy Resin SPEED 10-12-600 UV+ – Fast Projects, High Hardness

Pouring Epoxy Resin SPEED 10-12-600 UV+ is a fast-curing two-component resin with a shortened curing time. Thanks to its low viscosity, it flows excellently into details, degasses very well, and creates a perfectly glossy and very hard surface after curing. It has basic UV protection, so clear and thicker castings may show slight yellowing over time – it is therefore ideal to use it coloured.

Advantages of SPEED resin

• Very good self-degassing – minimum bubbles
• Perfectly glossy surface after pouring and curing
• Very high hardness – approx. 88 Shore D
• Low viscosity – flows well into molds and cavities
• Fast curing – finished product in a matter of hours

What is SPEED resin suitable for

• Casting resin height: up to 10 mm
• Jewelry and small decorations: keychains (letters, numbers and other shapes), lockets, pendants
• Practical products: coasters, tiered stands, trays, decorative surfaces of resin-coated cutting boards
• Especially suitable for colored products (paint, pigment, metallic effects)

Recommended moulds

• Silicone molds for tiered stands and wine holders
• Silicone molds for trays and coasters
• Silicone mold for keychains (various shapes, small letters and numbers)
• Silicone molds for bookmarks and jewelry molds
• Bases and frames for resin jewelry

Properties and Technical Parameters

Pigmentation and Colouring

For transparent tinting, use resin dyes. For opaque coloring, resins for resin are suitable. You can also add glowing powder, metallic powder, glitter, dried flowers, and decorative flakes to the resin, or use alcohol inks for special effects.

Due to only basic UV protection (UV+), we recommend using SPEED resin mainly for coloured or pigmented castings, where any subsequent yellowing will not be visible.

Usage notes

• When casting porous materials (wood, paper, etc.), first seal the surface with a primer to prevent bubbles from forming during curing.
• Processing temperature (mixing and casting) must not drop below 20 °C.
• During curing, prevent temperature fluctuations – they can negatively affect the surface of the casting.
• The mixing ratio is by weight. Always weigh both components – we do not recommend volumetric measurement.

Safety and classification

The substance mixture is classified as hazardous (EC) No. 1272/2008.

Component A

Standard hazard statements:
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.

Precautionary statements:
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P264 Wash hands and affected body parts thoroughly after handling.
P273 Avoid release to the environment.
P280 Wear protective gloves.
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/attention.

Component B

Standard hazard statements:
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H412 Harmful to aquatic life with long lasting effects.
H302+H332 Harmful if swallowed or if inhaled.

Precautionary statements:
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
Avoid inhaling dust/fume/gas/mist/vapors/aerosols.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. Rinse skin with water or shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Continue rinsing.
P310 Immediately call a doctor.
P501 Dispose of contents/container to an authorised waste disposal plant or return to supplier.