Base for making resin clocks and paintings - 310mm - with hole - XPS

Product detailed description

Resin Clock and Art Board - 310 mm - With Recess is the ideal choice if you want to start creating clocks without unnecessary drilling. The board has a milled recess for the clock mechanism so that the mechanism sits cleanly and straight, and also a prepared hole for the spindle, onto which the hands are attached.

Advantages of the board with a milled recess

• saves time – the center is prepared, you don't need to measure or drill anything,
• clean and precise workmanship – recess for the mechanism + hole for the spindle,
• ideal for clock faces where you want the center to be perfectly symmetrical,
• the substrate is ready for further layers – resin, moss, paints, pigments, and decorations.

Use

• epoxy resin wall clocks – geode effect, marbling, layered casting,
• clocks combining resin and wood,
• moss clocks and natural circular decorations,
• circular panels and pictures – if you want a prepared technical center for the movement.

Parameters

• diameter: 310 mm
• design: milled recess for clock movement + hole for spindle

Tip for working with resin

• before pouring, clean and degrease the substrate,
• for more absorbent substrates, a thin base layer is recommended to seal the surface and reduce bubbles,
• the recess for the movement is already prepared – during pouring, just make sure that resin does not get into it (you can temporarily cover it with tape or an insert).

If you want to make resin clocks faster and with a precisely prepared center, the 310 mm substrate with a milled recess is a great base for a clean and professional result.