Grinding and polishing kits
Product sorting
List of products
Mini Polishing Kit 4 – extra small polishing kit with discs approx. 15 mm in diameter. Ideal for detailed polishing of resin products, jewelry, small decorations, and...
Mini polishing set 2 – a set of three foam sponges with a shank for polishing pastes, ideal for polishing resin, jewelry, coasters, and small decorations. Different hardness...
Mini Polishing Kit 1 – a set of three foam pads with a shank for polishing pastes, ideal for polishing resin, jewelry, coasters, and small decorations. Different hardness levels...
Sanding Set for machine sanding of resin surfaces – ideal for eccentric sanders with a 150 mm disc (152 mm discs).
Mini Polishing Kit 3 – practical polishing kit with a hook-and-loop fastener, three foam discs with a diameter of approx. 25 mm, and polishing fleece. Ideal for polishing resin...
Sanding Pad Set – a basic selection for dry resin sanding. Premium sheets ensure even removal and low clogging.
Sanding Set for machine sanding of resin surfaces – ideal for eccentric sanders with a 150 mm disc (152 mm discs).
A basic set of abrasive paper sheets designed for wet hand sanding underwater. Ideal for resin jewellery and furniture.
Extensive set of abrasive paper sheets designed for wet hand sanding underwater. Ideal for resin jewellery and furniture.
Extensive set of abrasive paper sheets designed for wet hand sanding underwater. Ideal for resin jewellery and furniture.
Sanding Set for machine sanding of resin surfaces – ideal for eccentric sanders with a 150 mm disc (152 mm discs).
Sanding Set for machine sanding of resin surfaces – ideal for eccentric sanders with a 150 mm disc (152 mm discs).
Extensive set of abrasive paper sheets designed for wet hand sanding underwater. Ideal for resin jewellery and resin furniture.
Listing controls
What do sets usually include?
- Abrasive cutouts/sheets (various grit sizes P80–P3000)
- Abrasive sponges and pads for even pressure
- Felt/foam discs and polishing bobs
- Polishing paste (coarse/fine) and microfibre cloths
- Protective and cleaning aids (depending on the type of set)
Note: The specific composition is always stated in the product details; not every set contains all the items listed.
How to choose the right set
- Project type: jewellery and small mouldings vs. coasters and larger surfaces.
- Grinding method: manually (greater control) or mechanically (speed and consistency).
- Finish: 1-step polishing for a satin sheen, 2-step for a mirror effect.
Recommended procedure
- Align the surface with a coarser grit (e.g. P80–P240) depending on the level of unevenness.
- Gradually transition to finer grits (P400 → P800 → P1200 → P1500 → P2000/P3000).
- Ideally, sand under water and clean the surface between steps.
- Subsequently, polish with a coarser and then a fine paste to the desired shine.
Tip: For larger surfaces, check the flatness of the work surface and work dust-free.
Frequently Asked Questions
Is it necessary to sand underwater?
With resin, this significantly helps to reduce heating and micro-scratches; we recommend it for most steps.
Do the kits include polishing pastes?
Some do; the information is always listed on the product. Pastes can be purchased separately.
How to prevent dull patches after polishing?
Consistently maintain the gradual grit sequence without skipping a step, and complete sanding to at least P1500–P2000 before polishing.