Abrasion-resistant varnish for resin surfaces RENOVA DESK FINISCH - Matt - 1-6-300 UV++

Product detailed description

Abrasion-resistant varnish RENOVA DESK FINISH 1-6-300 UV++ is a specially developed polyurethane varnish for resin surfaces of dining tables, bar counters, and kitchen countertops

Advantages:
- very good levelling
- food contact approval
- high abrasion resistance
- High resistance to yellowing
- Very good self-deaeration
- Very high mechanical resistance after curing

Use:
- Final varnish for resin surfaces
- Final varnish for surfaces created by resin casting
- Final varnish for resin-cast dining table surfaces
- Final varnish for resin-cast bar counter surfaces
- Final varnish for resin-cast dining table surfaces
- Final varnish for resin-cast kitchen worktop surfaces

Properties:
- Two-component polyurethane varnish
- Mattifying
- UV stable ++
- Weight mixing ratio 5.7:1 by weight
- Density after mixing the two components 300 mPa.s (300mPa.s extra low viscosity - 9000mPa.s extra high viscosity)
- Provides a hardness of 90 Shore D after curing
- Thin-layer coating
- Working temperature 23 °C
- Workability 40 minutes
- Curing time 4 - 6 hours, walk-on 8 hours, full load 3 days
- Consumption per layer maximum 0.1kg per 1 m²

Packaging:
0.2kg, A+B component total
0.5kg A+B component total

Recommendation:
Apply 2 coats for perfect protection. Second coat after 2 hours.

Application:
Apply the prepared varnish in a very thin layer with a foam roller. Spread thoroughly into a thin layer and ensure even distribution of the lacquer. Tools can be cleaned with water.

Warning:
- The processing temperature (mixing, casting) must not fall below 20 °C.
- Temperature fluctuations must not occur during curing - a negative effect on the cured surface.
- The mixing ratio of component A + B is by weight. To maintain the ratio, we do not recommend volumetric measurement; both components must be weighed!
- After mixing both components, mix very thoroughly for 3-5 minutes